User's Manual

UniLink UL-800/801
Operator’s Manual
48 23-20-06.01
December 2011
To request a Composite Radar graphic:
1. Press COMP RADAR, LSK [1L] on the WX MAP REQUEST
page. The US COMP RADAR page will display.
2. Enter an airport identifier in the STATION field and press
[ENTER], or accept the default destination airport identifier from
the FMS.
NOTE: If an incomplete identifier is entered, the message TOO FEW
CHARACTERS will display and the field will flash. Pressing
the LSK and re-entering a complete identifier will correct the
error.
3. Select a Map Range using the range LSK options. A <*> indicator
will display adjacent to the selected range.
NOTE: The selected range is retained through system power cycles.
4. Press SEND, LSK [4R] to place the request in queue for
transmission.
NOTE: The SEND LSK will not be active and DATA REQUIRED
displays if no airport identifier has been entered.
US Radar Tops and Movement
Menu Navigation: UNILINK MENU 1/2 > WX MAPS > TOPS/MVMT
The US TOPS/ MVMT page is used to request US Radar Tops and
Movement graphics from a specific geographical area.