User's Manual

UniLink UL-800/801
Operator’s Manual
23-20-06.01 21
December 2011
6. If not active, press MACH, LSK [2R] and enter the requested
Mach number. Press [ENTER].
7. If not active, press ALTITUDE, LSK [3R] and enter the requested
flight level. Press [ENTER].
8. Press REMARKS, LSK [4L] and enter any remarks as needed.
OCEANIC Clearance remarks are entered using the OCEANIC
CLX REMARKS page (see the REMARKS Page section in this
manual).
9. Press SEND, LSK [4R] to place the message in queue for
transmission.
NOTE: If the information on this page is incomplete, a pop-up window
DATA REQUIRED will display and the SEND prompt will not
enable
Verify Message Log
Menu navigation: UNILINK MENU (1/2) > FLIGHT INFO > VERIF MSG LOG
The VERIF MSGS page displays all verified uplink and downlink
messages and can be used to check the queue status of sent
messages. See VERIF MSG LOG in the Message Logs section of this
manual.