Manualshelf

User's Manual

ManualsBrandsUniversal Avionics Systems ManualsElectronicsAvionics Communication Management Unit
11121314151617181920
UniLink UL-800/801
Operator’s Manual
23-20-06.01
5
December 2011
UniLink Advisories
The bottom left LSK on each UniLink page will display either the
UNILINK MENU prompt or UniLink advisories. UniLink advisories
notify the crew of UniLink activity that may require user action. Only
one advisory will display at a time in the order of priority. Pressing the
adjacent LSK allows viewing of the advisory message.
When no advisory is displayed, the advisory field is used to display the
UNILINK MENU prompt. Selecting this prompt displays the UNILINK
MENU.
When on an FMS page, UniLink advisories will be indicated by the
flashing MSG annunciator. Pressing the [MSG] key will allow viewing
of UniLink advisories and messages via the NEW MESSAGE Advisory
prompt (LSK [5L]). This will open the appropriate UniLink page.
Advisory Messages
NEW ERROR MSG – This advisory is active when an unviewed entry
exists in the Error Log. Selection of this advisory displays the detailed
error message page for most recently logged error message that has
not been viewed.
ACKNOWLEDGE – Indicates that an uplink message that is displayed
requires crew acknowledgment. Selection will send an
acknowledgment message.
NEW MSG – Indicates a new unverified message in the Uplink Log.
Selection of this advisory displays the detailed message page for the
latest unread unverified message.
NEW VERIF MSG – Indicates a new verified message in the Uplink
Log. Selection of this advisory displays the detailed message page for
the latest unread verified message.
NEW WX MAP – Indicates a new unviewed weather graphic in the
Graphic Log. Selection of this advisory displays the most recent
graphic.
SELCAL – Indicates a SELCAL request has been received. Selection
of this advisory displays the SELCAL page.
VHF VOICE (applies to UL-800 only) – Indicates the VDR is in Voice
Mode. Selection of this advisory displays the VHF VOICE page.
TEL SUSPEND – Indicates the configured dial attempt limit has been
reached and TEL LINK has been suspended (or TEL LINK has been
manually suspended). Selection of this advisory displays the TEL
DATA page.