User's Manual

UniLink UL-800/801 FANS
SCN 30.X
Operator’s Manual
23-20-06.02 75
December 2011
4. Press REVIEW, LSK [4L]. The ATC REVIEW page with
information for the position report will display.
5. Press SEND, LSK [4R] to put the position report in queue for
transmission.
ATC MSG LOG
Menu Navigation: UNILINK MENU > ATC >ATC MSG LOG
The ATC Message Log (ATC MSG LOG) function provides a log of up
to 150 of the most recent viewable messages exchanged with ATC
(75 most recently received and 75 most recently queued), with the
newest message shown first. The message entries are displayed on
the ATC MSGS 1/X page, accessed from the ATC page by pressing
ATC MSG LOG (LSK [4R]).
The ATC MSG LOG page allows users to review and/or print a
message (if a printer is configured).
NOTE: The number of pages of the ATC MSGS screen is dependent
on the number of viewable messages that UniLink has logged.
ATC MSGS displays up to four messages per page (except
for the first page which lists a maximum of three). ATC MSGS
may be composed of up to 38 pages.
UniLink assigns a status to each uplink message as follows:
Status Description
NEW UniLink has not yet displayed the uplink message to the user.
OLD UniLink has displayed the uplink message to the user and the
message does not require a downlink closure response
message from the user.