User's Manual

UniLink UL-800/801 FANS
SCN 30.X
Operator’s Manual
72 23-20-06.02
December 2011
Uplink Requests
Downlink Reports
Display
Display
Data
OFFSET
CONFIRM
ASSIGNED ROUTE
CONFIRM ASSIGNED
ROUTE NOT SUPPORTED
No Data
REPORT DISTANCE
[to from] [position]
AT [time] [distance] [to from]
[position]
Insufficient
CONFIRM ATIS
CODE
ATIS [ATIS code] Insufficient
Delayed Requests and Reports
Delayed uplink requests and reports, listed in Table 2, do require a
ROGER response and cannot be fulfilled immediately. If the crew
queues a positive downlink closure response (i.e., ROGER]) to a Data
Transaction uplink containing a delayed request, UniLink will add the
request to the RPTS LIST with status pending.
NOTE: Data statuses include:
• Specified = All data is specified by ATC
• No Data = No data is required for the communication
TABLE 2 – Delayed Reports and Requests
Uplink Reports
Downlink Reports
Display
Display
Data
REPORT LEAVING
[altitude]
LEAVING [altitude]
Specified
REPORT PASSING
[position]
PASSING [position]
Specified
REPORT LEVEL
[altitude]
LEVEL [altitude]
Specified
REPORT BACK ON
ROUTE
BACK ON ROUTE
No Data
REPORT REACHING
[altitude]
REACHING [altitude]
Specified
REPORT REACHING
BLOCK [altitude] TO
[altitude]
REACHING BLOCK [altitude]
TO [altitude] Specified