User's Manual

UniLink UL-800/801 FANS
SCN 30.X
Operator’s Manual
23-20-06.02 69
December 2011
NOTE: If the request title is truncated (as in the above example due to
no text wrapping), the complete title can be viewed on an ATC
MSG page.
2. To view a specific report response, press the left LSK adjacent
the listed request.
3. To delete a specific report, press the adjacent right-hand LSK. A
pop-up window will display to DELETE or CANCEL; press the
desired LSK.
4. Press RETURN, LSK [5R] to return to the ATC page.
NOTE: UniLink does not detect duplicate uplink ATC requests. This
must be done by the crew.
To respond to an ATC report request:
1. On the ATC RPTS 1/X page, find the requested report.
2. Press the left-hand LSK adjacent the report. If UniLink is capable
of prefilling the data required in the report, the ATC RPT 1/1
page will display showing the requested information. If UniLink
does not have enough information to prefill the report, a data
entry page will display depending on the specific report data
required.
(Example of an ATC RPT page)
3. If needed, press MODIFY, LSK [4L]. Depending on the requested
information, the ATC report page will display (such as ATC
PRESENT ALTITUDE or ATC ASSIGNED ROUTE).
4. Modify the information as needed and press REVIEW, LSK [4L].
The ATC RPT page displays showing the changed information.
5. As needed, press FREE-TEXT, LSK [3L] and enter text.