User's Manual

UniLink UL-800/801 FANS
SCN 30.X
Operator’s Manual
68 23-20-06.02
December 2011
RPTS LIST
Menu Navigation: UNILINK MENU > ATC > RPTS LIST
The RPTS (reports) LIST function provides a listing (displayed on the
ATC RPTS 1/X page) of the 15 oldest unanswered report requests by
ATC, with the most recent request shown first. As reports successfully
complete transmission (i.e., receive an ACARS network
acknowledgement), they are deleted from the RPTS LIST. The
number of pages of the ATC RPTS screen is dependent on the
number of requested reports. UniLink displays up to four report
requests per page for a maximum of four pages.
NOTE: A report requested by ATC can be accessed and sent via the
ATC RPTS 1/X page.
Report Statuses include:
Status Description
PENDING UniLink has not yet determined that the conditions have been
met for the report to be sent.
READY UniLink has determined that the conditions have been met for
the report to be sent.
QUEUED UniLink placed the report in its downlink queue but has not yet
successfully transmitted it.
SENDING UniLink is transmitting the report.
To view the Reports List:
1. On the ATC page press RPTS LIST, LSK [2R]. The ATC RPTS
1/X page will display, showing the 15 oldest unanswered report
requests in queue. Above each report is displayed the time the
report was received and its status.