User's Manual

UniLink UL-800/801 FANS
SCN 30.X
Operator’s Manual
23-20-06.02 63
December 2011
Speed Data Ranges:
Units
Lower Limit
Upper Limit
Resolution
Knots IAS 70 380 10
KPH IAS 100 1370 10
Mach 0.61 6.04 0.01
3. Press REVIEW, LSK [4L]. The ATC REVIEW 1/X page will
display showing the entered speed from the ATC EXP SPEED –
SINGLE page: “WHEN CAN WE EXPECT (specific speed value
entered).”
NOTE: If no data was entered in the SPEED field, the pop-up window
DATA REQUIERED will display
4. Press FREE-TEXT, LSK [3L] and add text as needed.
NOTE: Text is limited to 24 characters on the page (text will not
wrap).
5. Press SEND, LSK [4R] to put the speed negotiation request into
queue for transmission.
Speed – Block:
1. Press SPEED: LSK [2L]. The ATC EXP SPEED – SINGLE page
will display.
2. Press BLOCK, LSK [4R]. The ATC EXP SPEED – BLOCK page
will display.
3. With SPEED active, enter the bottom of the desired speed range:
• To enter speed in IAS (knots) - enter the speed value (i.e. 235)
and press [ENTER]. The entered value will be followed by IAS.