User's Manual

UniLink UL-800/801 FANS
SCN 30.X
Operator’s Manual
23-20-06.02 57
December 2011
3. If applicable, press DUE TO, LSK [1R] and toggle between
WEATHER, A/C PERF, or NONE (NONE is the default).
4. Press REVIEW, LSK [4L]. The ATC REVIEW 1/X page will
display showing the information entered on the ATC REQ RTE
1/2 page.
NOTE: If no data was entered in the HEADING or TRACK fields, the
pop-up window DATA REQUIRED will display.
5. Press FREE-TEXT, LSK [3L] and enter additional information as
needed.
6. Press SEND, LSK [4R] to put the request into queue for
transmission.
Procedure - Arrival, Approach, or Departure
To make a Procedure request:
1. On ATC REQ RTE 2/2, press PROC NAME, LSK [1L] and enter
the desired procedure name (up to six alphanumeric characters).
2. Press PROC TYPE, LSK [2L] and toggle between DEPT
(departure), ARRV (arrival), and APPR (approach) as applicable.
3. Press PROC TRANS, LSK [3L] (optional) and enter a transition
(up to five alphanumeric characters).
4. Press REVIEW, LSK [4L]. The ATC REVIEW 1/X page will display
with the procedure request information showing.
NOTE: If no data was entered in the PROC NAME field, the pop-up
window DATA REQUIRED will display.
5. Press FREE-TEXT, LSK [3L] and enter additional information as
needed.
6. Press SEND, LSK [4R] to put the request into queue for
transmission.