User's Manual

UniLink UL-800/801 FANS
SCN 30.X
Operator’s Manual
23-20-06.02 53
December 2011
Speed Data Ranges:
Units
Lower Limit
Upper Limit
Resolution
Knots IAS 70 380 10
KPH IAS 100 1370 10
Mach 0.61 6.04 0.01
4. Press TO, LSK [2L] and enter the other end of the desired speed
range.
5. Press DUE TO, LSK [1R] and toggle between WEATHER, A/C
PERF, or NONE as applicable (default is NONE).
6. Press REVIEW, LSK [4L]. The ATC REVIEW 1/X page will
display, reflecting the information entered on the ATC REQ
SPEED - BLOCK page.
NOTE: If no data was entered in the SPEED or TO fields, the pop-up
window DATA REQUIERED will display
7. Press FREE-TEXT, LSK [3R] and enter information as needed.
NOTE: Text is limited to 24 characters on the page (text will not
wrap).
8. Press SEND, LSK [4R] to put the altitude request in queue for
transmission.