User's Manual

UniLink UL-800/801 FANS
SCN 30.X
Operator’s Manual
48 23-20-06.02
December 2011
5. Press the appropriate LSK to enter information for FIX, NAVAID,
AIRPORT, TIME (ZULU), LAT/LON, or Place/Bearing/Distance
(P/B/D). Display will return to ATC REQ ALTITUDE page.
6. Press DUE TO, LSK [1R] and toggle between WEATHER, A/C
PERF, or NONE as applicable (default is NONE).
7. Press AT PILOT DISC, LSK [2R] and toggle between NO and
YES to indicate altitude change at the crew’s discretion (default
is NO).
8. Press OWN SEP/VMC, LSK [3R] and toggle between NO and
YES to indicate whether traffic separation will be maintained by
the crew (per VMC rules) or separation will be under ATC control
(default is NO)
9. Press REVIEW, LSK [4L]. The ATC REVIEW 1/X page will
display, reflecting the information entered on the ATC REQ
ALTITUDE page.
NOTE: If no data was entered in the ALTITUDE field, the pop-up
window DATA REQUIRED will display.
10. Press FREE-TEXT, LSK [3L] (optional) and enter information as
needed.
11. Press SEND, LSK [4R] to put the altitude request in queue for
transmission.
To make an altitude request – Block Altitude:
1. From the ATC REQUEST page, press ALTITUDE, LSK [1L]. The
ATC REQ ALTITUDE – SINGLE page will display.
2. Press BLOCK, LSK [4R]. The ATC REQ ALTITUDE - BLOCK
page will display.