User's Manual

UniLink UL-800/801 FANS
SCN 30.X
Operator’s Manual
23-20-06.02 47
December 2011
2. With ALTITUDE active, enter the desired altitude and press
[ENTER].
NOTE: Altitude can be entered as follows:
• Flight Level – Enter the three digit designation for flight level
(370 = FL370), “FL” followed by a three digit number
• Altitude (feet) – Enter the altitude (i.e., 16000)
• Altitude Below 600 ft. – Enter the altitude with a leading 0
(0137 = 137 ft)
• Metric Flight Level – Enter “S” followed by a number
• Altitude (meters) – Enter a number followed by an “M”
Altitude Data Ranges
Units
Lower Limit
Upper Limit
Resolution
Feet 0 25,000 10
Meters 0 16,000 1
Flight Level 030 600 1 (i.e., 100 ft.)
Metric Flight
Level
0100 2000 1 (i.e., 10m.)
3. Press CLIMB, LSK [2L] and toggle between NORMAL and
CRUISE as applicable.
4. Press AT, LSK [3L] (optional). The ATC REQUEST AT screen
will display.
NOTE: When the AT LSK is selected, the CLIMB option will
automatically set to NORMAL; CPDLC does not allow an
altitude request at a position or time to involve a CRUISE
climb.