User's Manual

UniLink UL-800/801 FANS
SCN 30.X
Operator’s Manual
88 23-20-06.02
December 2011
Once the test is complete, the telephone status is displayed on the
COMM STATUS page. The displayed status is described in the
COMM Status section of this manual.
SAT DATA
Menu Navigation: UNILINK MENU > COMM STATUS > COMM CONTROL >
SAT DATA
The SAT DATA page allows the user to send a SatCom link test.
SatCom Datalink Test
This feature provides the operator the ability to test the SatCom link
by sending a downlink over the SatCom system and then display the
link test status. Run the test by selecting LINK TEST SEND, LSK [4R].
While the test is running, the state of the SatCom link test is displayed
on the line above.
Once the test is complete, the SatCom status is displayed on the
COMM STATUS page. The displayed status is described in the
COMM Status section of this manual.
STATE
• RESUME: When selected, <
*
> will display. This allows the
SAT system to resume operation.
• SUSPEND: When selected, <
*
> will display. This suspends the
SAT system. While suspended, no SAT transmissions will be
permitted by UniLink and no VHF uplink messages will be
processed.