User manual

UAD Powered Plug-Ins - 278 - Neve 88RS Channel Strip
Output The Output knob controls the signal level that is output from the
plug-in. The default value is 0dB. The available range is
±20dB.
Power The Power switch determines whether the plug-in is active. This is
useful for comparing the processed settings to the original signal
or bypassing the plugin to reduce the UAD DSP load.
Toggle the switch to change the Power state; the switch is illumi-
nated in red when the plug-in is active.
Note: You can click-hold the power switch then drag it like a slider to quickly
compare the enabled/disabled state.
WebZine Article
An article about the Neve 88RS console can be found in the “Analog Obses-
sion” article of the Universal Audio May 2007 Webzine (Volume 5, Number
4), published on the internet at:
• http://www.uaudio.com/webzine/2007/may/index4.html
The 88RS at Skywalker Sound in California