User manual

UAD Powered Plug-Ins - 238 - Neve 1073 Equalizer
Note: You can also click the midrange symbol above the knob to cycle
through the available values, or shift + click to step back one frequency.
The available midrange center frequencies are 360Hz, 700Hz, 1.6kHz,
3.2kHz, 4.8kHz, 7.2kHz, and OFF. When OFF is specified, the band is dis-
abled. UAD CPU usage is not reduced when the band is OFF.
Low Band The low frequency band is controlled by dual-concentric
knobs, delivering smooth shelving equalization.
The inner knob controls the band gain, and the outer ring
selects the frequency or band disable. These two controls
are detailed below.
Low Gain
The equalization gain for the low band is selected with the inner knob of the
dual-concentric control. The available range is approximately ±15dB.
Rotate the control clockwise to boost the selected low band frequency, or
counter-clockwise to reduce the bass response.
Low Frequency
The Low frequency is selected with the outer ring of the dual-concentric knob
controls. The ring control can be dragged with the mouse, or click directly on
the “silkscreen” text to specify a frequency or disable the Low band.
Note: You can also click the low shelf symbol above the knob to cycle through
the available values, or shift + click to step back one frequency.
The available low band center frequencies are 35Hz, 60Hz, 110Hz, 220Hz,
and OFF. When OFF is specified, the band is disabled. UAD CPU usage is
not reduced when OFF.
Low Cut This knob specifies the fixed frequency of the Low Cut filter.
This filter has an 18dB per octave slope.
The available frequencies are 50Hz, 80Hz, 160Hz,
300Hz, and OFF. When OFF is specified, the low cut filter
is disabled. UAD CPU usage is not reduced when OFF.