User manual

UAD Powered Plug-Ins Manual - 124 - LA-2A and 1176LN
Peak Reduction Adjusts the amount of gain reduction, as well as the relative threshold. A Peak
Reduction value of 0 yields no compression. Rotate this control clockwise until
the desired amount of compression is achieved (to monitor the Peak Reduc-
tion, set the VU Meter to Gain Reduction). The Peak Reduction should be ad-
justed independently of the Gain control.
Meter This knob (in the upper right) sets the mode of the VU Meter. When set to Gain
Reduction, the VU Meter indicates the Gain Reduction level in dB. When set
to +10 or +4, the VU Meter indicates the output level in dB.
On/Power
Switch
Determines whether the LA-2A plugin is active. When the Power switch is in
the Off position, the plugin is disabled and UAD DSP usage is reduced.
Stereo
Operation
Phase-coherent stereo imaging is maintained when the LA-2A plugin is used
on a stereo signal.