User Manual

UAD‑2 Live Rack Manual Chapter 3: System Setup 28
Thunderbolt 1 and 2 Mac Wiring
UAD‑2 Live Rack is designed for a direct connection to a Thunderbolt 3 Mac. However,
older Macs with Thunderbolt 1 or Thunderbolt 2 ports can be used via a Thunderbolt 2
cable and the Apple Thunderbolt 3 to Thunderbolt 2 adapter.
Additional Items Needed with Thunderbolt 1 and Thunderbolt 2 Macs
(1) Apple Thunderbolt 3 to Thunderbolt 2 Adapter (Apple part number
MMEL2AM/A) at the UAD‑2 Live Rack port for the Thunderbolt 2 cable
connection.
(1) Thunderbolt 2 cable for the Mac computer connection. Note that this cable
replaces the Thunderbolt 3 cable that would be used for a Thunderbolt 3 port at
the computer.
Thunderbolt 1 and 2 Mac Connection Notes
The wiring for Thunderbolt 1 and Thunderbolt 2 Macs is identical.
A multi‑unit system with a Thunderbolt 1 or 2 Mac is similar to Thunderbolt 3
wiring. The only difference is with the host computer connection. The Thunderbolt
2 host computer connection in the diagram below is the same for single and
multi‑unit setups.
System connections for Thunderbolt 1 and Thunderbolt 2 Macs
UAD-2 Live Rack Unit
IN–MADI–OUT
UNIVERSAL AUDIO, INC.
1394b 1 1394b 2
MADI IN
MADI Device
MADI Optical SC
Thunderbolt 2
cable
Thunderbolt 2 Mac
Thunderbolt 3 to
Thunderbolt 2 Adapter