Manual

Apollo Twin USB Hardware Manual Quick Start 14
Software Setup
Note: Items on this page are detailed in the Apollo Software Manual. See About
Apollo Twin USB Documentation for related information.
System Requirements
All system requirements must be met for Apollo Twin USB to operate properly. Before
proceeding with installation, see the system requirements in the Apollo Software Manual.
Software Installation
The software must be installed to use the hardware and UAD plug-ins. The UAD Powered
Plug-Ins software installer contains the Apollo Twin USB software and drivers.
Important: For optimum results, connect and power on Apollo Twin USB before
installing the software.
To obtain the latest UAD Powered Plug-Ins software installer, visit:
• www.uaudio.com/downloads
Registration and Authorization
Apollo Twin USB must be registered and authorized to unlock UAD plug-ins that are
bundled with the product. Registration and authorization via a web browser is triggered
automatically by the UAD software the first time the device is recognized.
System Configuration
Complete details about setting up the Apollo Twin USB system, including how to
integrate with a DAW and related information, are included in the Apollo Software
Manual.
Console Application
The included Console application is the software interface for the Apollo Twin USB
hardware. Console controls Apollo Twin USB and its digital mixing, monitoring, and
Realtime UAD Processing features. Console is also used to configure Apollo Twin USB’s
I/O settings such as sample rate, clock source, reference levels, and DAW I/O buffer size.
For complete details about how to operate Console, refer to the Apollo Software Manual.
UA Support Videos
Informational videos are available online to help you get started with Apollo Twin USB:
• help.uaudio.com