User Manual

UAD Powered Plug-Ins Manual - 96 - Chapter 9: UAD Delay Compensation
• UAD Pultec-Pro only requires one compensation per instance. For example,
if using both MEQ-5 and EQP-1A within a single Pultec-Pro, only one in-
stance compensation is required.
• Since the maximum Samples value in one DelayComp instance is 128,
more than one DelayComp instance will be required (in series) if the com-
pensation value from Table 7 exceeds 128.
• Latency compensation techniques for upsampled plug-ins apply to UAD
Track Advance (page 99) as well.
• The latency in Table 7 is also produced when LiveTrack mode (page 76) is
used with upsampled plug-ins.
• Upsampled plug-in latency cannot be displayed in the “Plug-In Latency Sec-
tion” on page 59 due to technical limitations.
Upsampling Values Table
Table 7 lists the additional latency produced by upsampled UAD plug-ins. See
the “Compensating Upsampled Plug-Ins” on page 95 for details.
Table 7. Upsampled UAD plug-ins with additional latencies
Sample Rate (kHz)
Upsampled Plug-In 44.1 48 88.2 96 176.4 192
Pultiec EQ/Pultec-Pro UAD-1: 13
UAD-2: 31
UAD-1: 13
UAD-2: 31
13 13 0 0
Precision Limiter 64 69 129 140 259 281
Neve 33609 UAD-1: 67
UAD-2: 55
UAD-1: 67
UAD-2: 55
UAD-1: 67
UAD-2: 55
UAD-1: 67
UAD-2: 55
UAD-1: 42
UAD-2: 88
UAD-1: 42
UAD-2: 88
Precision Maximizer 67 67 67 67 42 42
Precision EQ
Helios Type 69
Neve 1073
Neve 1081
31 31 13 13 0 0
Precision Multiband 15360 16,896 30,720 33,792 UAD-1:
N/A
UAD-2:
61,440
UAD-1:
N/A
UAD-2:
66,048
Moog Filter 55 55 55 55 N/A N/A