User Manual

UAD Powered Plug-Ins Manual - 64 - Chapter 6: UAD Meter & Control Panel
For example, you could run low-DSP plug-ins such as the UAD CS-1 on the
UAD-1, while specifying that resource-hungry plug-ins such as Neve 33609
run on the UAD-2.
Run On Menu The Run On column contains a drop menu for each plug-in. Spec-
ify which card type (UAD-2 or UAD-1) the plug-in will load onto
with the Run On drop menu. Click the disclosure triangle to see
the menu, then drag and release on the desired card type.
Tip: Hold Shift when specifying a card to quickly change all
plug-ins in the list to that card type.
If plug-ins for only one card type (UAD-2 or UAD-1) are installed, the disclo-
sure triangle is not displayed and the drop menu is unavailable.
Note: The Run On menu should not be used dynamically; it is designed to be
“set and forget” because the value is not stored within sessions.
Help Column Click the Help button (“?”) to open the UADManual.pdf (the file you are
reading now).
Buy Column If the computer is connected to the internet, clicking Buy links to the
plug-in product pages at the UA online store. See “UA Online Store” on
page 46 for purchasing details.
Configuration Panel
The UAD Configuration Panel is where most of the global UAD settings and
preferences are specified. Refer to Figure 12 on page 65 for the parameter
descriptions.
The parameters that are displayed in the Configuration Panel are dependent
upon the UAD hardware that is currently installed and the OS platform (Win-
dows or Mac). For example, if you have only UAD-2 cards installed in a Win-
dows system, you will not see the UAD-1 or Macintosh parameters.