User Manual

UAD Powered Plug-Ins Manual - 62 - Chapter 6: UAD Meter & Control Panel
Status Column The Status column reflects the current state of each UAD plug-in. The status de-
pends on which card (UAD-2 or UAD-1) the plug-in is running on; the status
may change if the “Run On” card is changed (page 64). After the authoriza-
tion file is loaded (“Authorization Overview” on page 42), the status will
show one of the following:
Authorized for all cards
The plug-in is fully licensed and authorized to run on all cards in the system.
Start Demo
The demo period has not been started for the plug-in. Click the “START
DEMO” button to begin the 14-day trial period.
Demo (days remaining)
If the14-day trial period has been activated but is not yet expired, the number
of days remaining is displayed here in green text.
Important: The 14-day demo period can only be activated once, and can-
not be stopped or restarted during this period! We recommend you do not ac-
tivate demo mode until you have the time to thoroughly check out its sound
and functionality. See “Demo Mode” on page 45 for detailed information.
Not available for UAD-2
The plug-in has not been ported to the UAD-2 and is available to run on
UAD–1 cards only. In this case, the Run On menu is unavailable.
No UAD-1 cards found
This is displayed for unported UAD-1 plug-ins when both card types were se-
lected during software installation, but only the UAD-2 is currently installed. In
this case, the Run On menu is unavailable.