User Manual

UAD Powered Plug-Ins Manual - 334 - Chapter 37: Nigel
Wah Pedal Mode
Similar to Wah mode, in Wah Pedal mode the filter cutoff frequency is varied
according to the Wah knob setting. However, when the knob reaches its max-
imum value the effect is bypassed until the knob reaches is maximum value
again at which time the effect is re-engaged.
Wah Pedal mode is ideally suited to emulating a real Wah pedal by using a
MIDI foot pedal controller.
Mod Menu Table
Filter Type Menu Determines the type of filter to be used by the Mod Filter. This parameter will
affect the overall sonic character of the plug-in. Four filter types are available.
Mod Filter
On/Off Button
Enables or disables the Mod Filter.You can use this switch to compare the
Mod Filter settings to that of the original signal or bypass the Mod Filter to re-
duce the UAD DSP load.
Table 23. Mod Filter: Mod Types and Descriptions
Sin LFO mode with Sine waveshape.
Square LFO mode with Square waveshape.
Random LFO mode with Random waveshape.
Env Up Normal Envelope mode. Filter cutoff frequency is
dynamically increased as signal level increases.
Env Down Inverted Envelope mode. Filter cutoff frequency is
dynamically decreased as signal level increases.
Wah Fixed Wah mode.
Wah Pedal Fixed Wah mode with latched bypass mode.
Table 24. Mod Filter: Filter Types and Descriptions
Lowpass Frequencies below the filter cutoff frequency are allowed to pass
through the filter.
Bandpass Frequencies around the filter cutoff frequency are allowed to pass
through the filter. Lowest and highest frequencies are not passed.
Highpass Frequencies above the filter cutoff frequency are allowed to pass
through the filter.
Wah Traditional wah pedal setting.