User Manual

UAD Powered Plug-Ins Manual - 330 - Chapter 37: Nigel
LFO Type Menu Determines the LFO (low frequency oscillator) waveshape and phase used to
modulate the signal. The waveshape can be set to triangle or sine, each with
varying duty cycles and phases.
Order Menu Determines the filter order for the Phasor filter banks. This setting affects the
tonal complexity of the Phasor. Higher Order filters are more detailed than
lower Order filters. Ten filter Order values are available, 3 through 12.
Phasor On/Off
Button
Enables or disables the Phasor module.You can use this switch to compare the
Phasor settings to that of the original signal or bypass the Phasor to reduce
UAD DSP load.
Table 22. Phasor LFO Types and Descriptions
Sin Pure sine wave.
Sin 2 Modified sine wave that stays high longer.
Sin 3 Modified sine wave that stays low longer.
Square Square wave.
Square 2 Modified square wave that stays high longer.
Square 3 Modified square wave that stays low longer.
Sin 180 Sine wave 180 degrees out of phase.
Square 180 Square wave 180 degrees out of phase.