User Manual

UAD Powered Plug-Ins Manual - 303 - Chapter 35: Precision Enhancer kHz
Mode C
Mode C dynamically enhances the high frequency content. The enhancement
amount is increased as the input signal level increases.
Mode D
Mode D dynamically enhances both high and low frequency content. The en-
hancement amount is increased as the input signal level increases. The Fre-
quency parameter is disabled in this mode.
All Mode
All Mode is similar to Mode D in that it dynamically enhances both high and
low frequency content, but the effected frequency spectrums are even
broader. The enhancement amount is increased as the input signal level in-
creases. The Frequency parameter is disabled in this mode.
Speed The Speed parameter defines the attack and release char-
acteristic of the enhancement process.
Fast
In Fast mode, the enhancement processor has a quick response time of 30ms,
which yields a more percussive “bite” and/or a more aggressive sound.
Slow
Slow mode has a slower response time of 180ms which can deliver a
smoother sound overall.
Frequency The Frequency parameter defines the cutoff frequency
for the enhancement process in Mode A and Mode
C. Frequencies above this value are enhanced by the
processor. The available range is 1.00kHz to
10.0kHz.
Note: Frequency is disabled in Modes B/D/All.
Output Output controls the signal level that is output from the
plug-in. The available range is -20dB to 0dB.