User Manual

UAD Powered Plug-Ins Manual - 260 - Chapter 30: RealVerb Pro
3. Drag the Decay Time control for the late-field reverberations left or right
(from 0.10–96.00 seconds) to affect the length of the reverb tail. The De-
cay Time is indicated in the text field at the bottom of the Timing panel.
4. To affect how quickly the late-field reverberations become more dense, ad-
just the Diffusion control at the right of Late Reflection display in the Timing
panel. The higher the Diffusion value (near the top of the display), the more
rapidly a dense reverb tail evolves.
Positioning
One of the unique features of RealVerb Pro is the ability to separately position
the direct path, early reflections, and late-field reverberation. The Position
panel (see Figure 90) provides panning controls for each of these reverb com-
ponents. In addition, a proprietary Distance control adjusts perceived source
distance. These controls allow realistic synthesis of acoustic spaces—for in-
stance listening at the entrance of an alley way, where all response compo-
nents arrive from the same direction, or listening in the same alley next to the
source, where the early reflections and reverberation surround the listener.
To pan the direct (dry) signal:
1. Drag the Direct slider left or right. A value of <100 pans the signal hard
left; a value of 100> pans the signal hard right. A value of <0> places the
signal in the center of the stereo field.
Figure 90. RealVerb Pro Positioning panel