Operator Instructions Includes - Foreseen Use, Work Stations, Putting Into Service, Operating, Dismantling, Assembly and Safety Rules Manufacturer/Supplier Universal Air Tool Company Limited Unit 8 Lane End Industrial Park High Wycombe Bucks HP14 3BY Tel No (01494) 883300 Fax No (01494) 883237 Product Nett Weight 2.35 lbs 1.07 Kg Recommended Use Of Balancer Or Support No Air Pressure Recommended Working 6.3 Recommended Minimum n/a Maximum 7.
Operating Select a suitable abrasive disc (see Section "Foreseen use of the tool") and make sure that it is fixed securely to the tool. If using the 5½ dia disc pad fit the 4½ dia disc pad behind it and the 3” dia pad behind that. If fitting the 4½ dia disc pad use 3” dia disc pad behind it. Connect to suitable air supply as recommended. Apply the sander lightly to the work and allow the abrasive disc to cut. Take great care when sanding around sharp edges and surfaces to avoid the disc snagging i.e.
UT8771A Ref No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Jan 2005 Ver 1.
Declaration of Conformity Universal Air Tool Company Limited Unit 8, Lane End Industrial Park, High Wycombe, Bucks, HP14 3BY, England declare under our sole responsibility that the product Model UT8771A Sander, Serial Number EN792 (Draft), EN292 Parts 1 & 2, ISO 8662 Parts 1 & 8, Pneurop PN8NTC1 following the provisions of 89/392/EEC as amended by 91/368/EEC & 93/44/EEC Directives to which this declaration relates is in conformity with the following standard(s) or other normative document(s) Lane End Plac
