Important Operator Instructions Read these instructions carefully before installing, operating, servicing or repairing this tool. Keep these instructions in a safe accessible place. Includes - Foreseen Use, Work Stations, Putting Into Service, Operating, Dismantling, Assembly and Safety Rules Manufacturer/Supplier Universal Air Tool Company Limited Unit 8 Lane End Industrial Park High Wycombe Bucks HP14 3BY Tel No (01494) 883300 Fax No (01494) 883237 Product Nett Weight 1.9 lbs 0.
pressing the trigger on the tool. Disconnect the air line and pour into the intake bushing a teaspoonful (5ml) of a suitable pneumatic motor lubricating oil preferably incorporating a rust inhibitor. Reconnect tool to air supply and run tool slowly for a few seconds to allow air to circulate the oil. If tool is used frequently lubricate on daily basis and if tool starts to slow or lose power. It is recommended that the air pressure at the tool whilst the tool is running is 90 p.s.i./6.3 bar.
UT8020-T Ref No 1 2 3 4 5 6 7 8 9 10 11 12 15 16 17 19 20 21 22 23 24 25 Mar 2005 Ver 1.
Declaration of Conformity Universal Air Tool Company Limited Unit 8, Lane End Industrial Park, High Wycombe, Bucks, HP14 3BY, England declare under our sole responsibility that the product Model UT8020-T Butterfly Lever Impact Wrench, Serial Number EN792 (Draft), EN292 Parts 1 & 2, ISO 8662 Parts 1 & 7, Pneurop PN8NTC1 following the provisions of 89/392/EEC as amended by 91/368/EEC & 93/44/EEC Directives to which this declaration relates is in conformity with the following standard(s) or other normative do
