Operator Instructions Includes - Foreseen Use, Work Stations, Putting Into Service, Operating, Dismantling, Assembly and Safety Rules Manufacturer/Supplier Universal Air Tool Company Limited Unit 8 Lane End Industrial Park High Wycombe Bucks HP14 3BY Tel No (01494) 883300 Fax No (01494) 883237 Product Nett Weight 9.90 lbs 4.50 Kg Recommended Use Of Balancer Or Support Air Pressure Recommended Working 6.3 Recommended Minimum n/a Maximum 7.
into the intake bushing (21) a teaspoonful (5ml) of a suitable pneumatic motor lubricating oil preferably incorporating a rust inhibitor. Reconnect tool to air supply and run tool slowly for a few seconds to allow air to circulate the oil. If tool is used frequently lubricate on daily basis and if tool starts to slow or lose power. When lubricating, also ensure that screen (1) is clean. It is recommended that the air pressure at the tool whilst the tool is running is 90 p.s.i./6.3 bar.
UT5315 Ref No Part No 1 2 3 4 5 6 7 8 9 B826001120920 B826034120920 B826035000000 B826102001000 B826143000000 B826017200100 B82603700100 B826038200110 B811106001000 11 B826045800000 12 13 14 15 16 17 18 19 20 21 21-1 22 23 24 25 26 27 28 B826069800000 B811105001000 B826004740000 B832104000000 B811129000000 B826006800000 B826007200100 B826008000000 B811009280000 B811010200110 B811010201110 B811067770000 B826002120100 B924118800000 B826003200100 B826012200110 B826117800000 B826128000000 Nov 2004 Ver
Declaration of Conformity Universal Air Tool Company Limited Unit 8, Lane End Industrial Park, High Wycombe, Bucks, HP14 3BY, England declare under our sole responsibility that the product Model UT5315 3/4 Impact Wrench, Serial Number EN792 (Draft), EN292 Parts 1 & 2, ISO 8662 Parts 1 & 7, Pneurop PN8NTC1 following the provisions of 89/392/EEC as amended by 91/368/EEC & 93/44/EEC Directives to which this declaration relates is in conformity with the following standard(s) or other normative document(s) Lan
