U4114
SAFETY PRECAUTION The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to “dangerous voltage” and to prevent from a risk of electric shock. Warning: To reduce the risk of electric shock, don’t open the cabinet. Refer servicing to qualified personnel only. The exclamation point within an equilateral triangle is intended to alert the user to important operating and maintenance (servicing).
QUICK INSTALLATION GUIDE QUICK INSTALLATION GUIDE FOLLOW NEXT STEPS FOR THE CORRECT INSTALLATION OF THIS RECEIVER. STEP 1: CONNECTIONS The coaxial cable, with satellite signal, must be connected to the “IF IN” connector. The “TV SCART” connector must be connector to the TV set. Depending on the type of installation, the receiver should be connected and configured following next examples. Example 2 – DISEqC switches Example 3 – Combined with terrestrial rev 1.
QUICK INSTALLATION GUIDE STEP 2: BASIC CONFIGURATION OF THE RECEIVER IMAGE 1 The receiver includes an installation assistant (Quick Setup) that will help you to setup the different parameters.
QUICK INSTALLATION GUIDE Antenna Setup: You can edit the following items (Image 2): rev 1.1 Multi search: You can edit the following items (Image 4): PAG. 5 English 1. Satellite: Press [ ] to switch Satellites or press [OK] to enter satellite list to select directly. 2. LNB Configuration: Selecting this option and pressing [OK], the LNB Configuration menu will be displayed.
QUICK INSTALLATION GUIDE English rev 1.1 IMAGE 4 1. On “Satellite” item press [OK] to open the satellite list. Then press [ ] to move the highlight and press [OK] to mark/unmark and [EXIT] to finish the selection. You can select several satellites in this menu. At the bottom of the screen you can see the selected satellites. The system will use DiSEqC1.0/1.1, DiSEqC1.2 and USALS functions to search the marked satellites and scan channels. 2.
QUICK INSTALLATION GUIDE STEP 3: TIME CONFIGURATION It is recommended to setup the clock before starting to enjoy the receiver, because correct time maybe is required by some applications. Please complete following options: IMAGE 5 rev 1.1 NOTE: If the current channel provides the correct time information, you will see the current time after you entered “Time” menu. If the channel doesn’t provide time information, you have to input the date and time information manually.
QUICK INSTALLATION GUIDE TV Channel List: This option shows the list of TV stored channels. Radio Channel List: This option shows the list of Radio stored channels. Channel Setup: This option allows setting the receiver to start in a predefined channel. Favourite Channel List Name: It allows changing the name of the favourite groups. Delete All: This option deletes all TV and Radio stored channels. Restore channel list and settings: This option loads the user TV and Radio channel list, saved previously.
QUICK INSTALLATION GUIDE Language: This option allows choosing the language of the menus. TV System: This option allows choosing the video Standard and other parameters of the screen. Time & Timer Setting: Timer setting menu. OSD Setting: This option allows configuring the subtitles of the channel information. Parental Lock: In this option, user can lock the access to the menu and change the password of the receiver.
INDEX Safety Precaution Caution…..…………………...............................………………………………………………12 1. Panel & Remote Control Description……...........................................………………..13 1.1. Front Panel Description…….......................................…………………………13 1.2. Rear Panel Description……................................………….…………………..12 1.3. Remote Control Description…...............................................…………………………..14 3. Channel……………………………................……………………………………………19 3.1.
INDEX 3.3 Channel Setup…………..................................………………………………......21 3.3.1. Start-up Channel……………................................……………………………......22 3.3.2. Channel Play Type………........................…………………………………......22 3.4. Favourite Channel List Name……..........……………………………………......22 3.5. Delete All……...............……………………………………………….22 3.6. Restore channel list and settings………………..........…………………………………….23 3.7. Save channel list and settings………………..........…………………………………….23 4.
SAFETY PRECAUTION The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to “dangerous voltage” and to prevent from a risk of electric shock. Warning: To reduce the risk of electric shock, don’t open the cabinet. Refer servicing to qualified personnel only. The exclamation point within an equilateral triangle is intended to alert the user to important operating and maintenance (servicing).
PANEL & REMOTE CONTROL DESCRIPTION 1. PANEL & REMOTE CONTROL DESCRIPTION 1.1. FRONT PANEL DESCRIPTION 1 32 4 5 6 1.2. REAR PANEL DESCRIPTION 1 2 3 6 5 4 7 8 rev 1.1 1. IF OUT: Satellite output for cascading to other devices. Note: The operation of another receiver at the same time is only possible with limited channel selection. 2. IF IN: Satellite input. 3. S/PDIF: Coaxial output for digital audio (AC3). 4. RS-232: Serial Port allowing software upgrades. 5.
PANEL & REMOTE CONTROL DESCRIPTION 1 2 3 4 5 8 6 9 7 10 11 12 13 16 17 20 21 19 18 2. BASIC OPERATIONS 2.0. SWITCH ON STB Switch the [Device’s Main Power] switch on. When the STB is first used it will display the quick setup page where the receiver can be configured quickly. For further use the STB will play the same channel as last time when it was switched off.
BASIC OPERATIONS 2.1. STANDBY 1. Press [Power] button to switch from TV mode to Standby mode. 2. In Standby mode press [Power] button again to switch back to TV mode. The last active channel will be showed. 3. To switch off the STB complete press the main power button (placed at the rear panel of the receiver). 2.2. TTX 1. Press [TXT] button in TV mode to open the teletext page (OSD 1). This service is depending on the support of the channel provider. 2.
BASIC OPERATIONS 2.8. VOL+/VOL- In TV mode, press [Vol+/Vol-] to adjust volume. 2.9. EXIT Press [Exit] button to exit the current menu. 2.10. MENU Press [Menu] button to enter or exit the current menu. 2.11. RECALL Pressing the [Back] button allows you to toggle between the actual and the last selected channel. OSD 4 2.12. CHANNEL LIST OSD 6 rev 1.1 English OSD 5 In TV mode press [OK] button to open the Channel List window.
BASIC OPERATIONS 2.13. EPG OSD 8 2.14. LIST In TV mode, press [List] button to access directly to the “TV Channel List” menu or to the “Radio Channel List” menu. 2.15. FAVOURITES OSD 9 1. In TV mode press the [Favourite] button to display the Favourite Group window on the screen as the picture beside shows (OSD 10). 2. In the Favourite Group window you can select the desired favourite channel with [ ] and confirm it with [OK] to switch to it. In bigger groups you can navigate with [Pup/Pdw]. 3.
BASIC OPERATIONS 2.17. INFORMATION In TV mode, press [INFO] button can open information screen (OSD 12), in the window shows the parameters of current channel. 2.18. FAV +/OSD 12 1. In TV mode press the [FAV+/FAV-] buttons to switch between the favourites channels in the current Favourite Group directly. 2. The sequence of the favourite channels is following the sequence in the related Favourite Group list. 2.19. CHANGE SATELLITE 1. In TV mode, press [Pup/Pdw] to switch directly between satellites. 2.
CHANNEL 3. CHANNEL OSD 15 Press [Menu] in the TV mode to enter the main menu (OSD 15). ] to select the Channel item. 1. Press [ 2. Press [OK] to enter the selected item. In the Channel menu (OSD 16): ] to select the wanted menu item. 3. Press [ 4. Press [OK] to enter the selected item among. - TV Channel List - Radio Channel List - Channel setup - Favourite channel list name - Delete All - Restore channel list and settings - Save channel list and settings 3.1. TV CHANNEL LIST OSD 17 3.1.1.
CHANNEL 3.1.2. MOVE 1. Press [Red] button to show a moving icon behind the channel name (OSD 19). ]. 2. Move the channel to the desired position with [ Press [OK] to confirm the position. 3.1.3. SORT OSD 19 3.1.4. EDIT 1. After pressing the [Yellow] button a window for entering the password will open. The default password is “0000”. 2. You can Delete, Skip, Lock and Edit the channel (OSD 21). 3. Press [Exit] to leave the Channel Editing.
CHANNEL 3.1.4.4 EDIT OSD 25 OSD 27 3.1.5. FIND OSD 28 1. Press [Blue] button to open the “Find” window like showed besides (OSD 28). Press [ ] to select the leading character of the channel name and press [OK] to confirm it. 2. After entering the character(s) highlight “OK” in the window and press [OK] on the RCU. 3. Press [Exit] button to close the Find window and brings you back to the channel list. 3.2. RADIO CHANNEL LIST rev 1.
CHANNEL screen like beside (OSD 30): 3.3.1. START-UP CHANNEL OSD 30 OSD 31 Press [OK] to enter “Start-up Channel” menu to see the screen like showed beside (OSD 31): 1. If you set of “Boot on Channel” to “On” you can edit the following two items. If the setting is “Off” the box always starts with the channel that was running when the box has been switched off. 2. On the “Mode” item you can select either “TV channel” or “Radio channel”. 3.
CHANNEL ? FREQUENTLY ASKED QUESTION Q: IF I incautiously delete all channels, what should I do? A: There are three ways to restore: - To re-search all channels at the “Installation” menu. - Use “Factory Default” function to restore all channels in the “Tools” menu. The receiver will load the factory channels. - Use the “Restore channel list and settings” option as next point shows. OSD 35 3.6.
INSTALLATION 4. INSTALLATION OSD 38 Press [Menu] in the TV mode to enter the main menu (OSD 38). ] to select the Installation item. 1. Press [ 2. Press [OK] to enter the selected item. In the Installation menu (OSD 39): 3. Press [ ] to select the wanted menu item. 4. Press [OK] to enter the selected item among. - Antenna Setup - Single Search - Multi Search - TP Scan - Satellite List - TP List - Satellite Guide 4.1.
INSTALLATION OSD 42 switches. 4. On “TP Index” item use [ ] to select the desired transponder. 5. In the “FTA Only” item, press [ ] to select to scan only free channels or even scrambled channels. If you select “Yes” it will scan free channels only. 6. In “Scan Channel” item, press [ ] to select to scan TV + Radio Channels, or just TV channels or just Radio channels. 7. In “Scan Mode” item you can select “Auto Scan” to blind scan or “Preset Scan” to scan all preset transponders. 8.
INSTALLATION OSD 46 functions to search the marked satellites and scan channels. 2. On “FTA Only” item, press [ ] to select scanning of all channels or just scanning of free channels. If you select “Yes” it will scan free channels only. 3. On “Scan Channel” item, press [ ] to select the scanning range from TV + Radio Channels, only TV channels or only Radio channels. 4.
INSTALLATION 7. On the “TP Scan” item, press [Exit] to cancel the scanning and saving the found channels. 4.5. SATELLITE LIST OSD 50 OSD 51 4.6. TP LIST OSD 52 rev 1.1 OSD 53 When you open the “TP List” menu you will see a window like the one beside (OSD 53). ] to change the marked satellite. Press [ 1. Press [ ] to change the marked TP. 2. Press [Red] button to open the “Edit TP” menu (OSD 54). Here you can edit the Transponder’s data like frequency, polarity and Symbol Rate.
INSTALLATION 4.7. SATELLITE GUIDE OSD 55 When you enter “Satellite Guide” menu, you will see the screen like beside (OSD 57). Here you can enter your local longitude and latitude and the satellite’s longitude. The receiver calculates the antenna’s azimuth and elevation to point your antenna to the selected satellite. 1. Use the [Number] buttons to input the values of “Local Longitude”, “Local Latitude” and “Satellite Longitude”. 2.
SYSTEM SETUP 5. SYSTEM SETUP OSD 59 Press [Menu] in the TV mode to enter the main menu (OSD 59). ] to select the System Setup item. 1. Press [ 2. Press [OK] to enter the selected item. In the System Setup menu (OSD 60): 3. Press [ ] to select the wanted menu item. 4. Press [OK] to enter the selected item among. - Language - TV System - Time & Timer Setting - OSD Setting - Parental Lock - Power setting - RCU Position Switch 5.1. LANGUAGE OSD 61 rev 1.1 5.2.
SYSTEM SETUP OSD 63 5.3. TIME & TIMER SETTING When you enter “Time & Timer Setting” a menu with three items will be opened (OSD 63). Use [ ] to select between the three options and confirm with [OK]. 5.3.1. TIME OSD 65 When you select “Time” and press [OK] then you will see a window like the one beside (OSD 64): 1. GMT Usage: This item is used to set the time by using the time signal from the satellite. Press [ ] to change the setting. 2.
SYSTEM SETUP 5.3.2. TIMER OSD 67 rev 1.1 5.3.3. SLEEP TIMER OSD 69 Press [OK] button in this option to set the sleep timer. You will see “SLEEP TIME OFF / SLEEP TIME 10 / SLEEP TIME 30 PAG. 31 English OSD 68 Select “Timer” item and press [OK] to enter the “Timer list” menu (OSD 65). ] to select a timer. Then press [Enter] to You can press [ open the related timer menu (OSD 66). The current time will be displayed in the first column.
SYSTEM SETUP / SLEEP TIME 60 / SLEEP TIME 90 / SLEEP TIME 120”. (OSD 69) If you set a sleep time, the system will change to Standby mode after the chosen time period. 5.4. OSD SETTING OSD 70 English When you select “OSD Setting” you will see a screen like beside (OSD 70): 1. Subtitle Display: Press [ ] to select “On” or “Off”. If the current channel has subtitle information, it will be displayed if this function is “On”. If this function is “Off” subtitles won’t be displayed. 2.
SYSTEM SETUP need to use the new password to open locked menus or locked channels. NOTE: The default password is 0000 5. Press [Exit] to leave the “Parental Lock” menu. 5.6. LNB POWER OSD 72 5.7. RCU POSITION SWITCH In order to avoid interferences between remote controls, you have the possibility to change the code of it, to do that you have to change the position of a switch in the remote control. But first of all you have to change this code in the receiver.
TOOLS 6. TOOLS OSD 75 Press [Menu] in the TV mode to enter the main menu (OSD 75). ] to select the Tools item. 1. Press [ 2. Press [OK] to enter the selected item. In the Tools menu (OSD 76): 3. Press [ ] to select the wanted menu item. 4. Press [OK] to enter the selected item among. - Information - Quick Setup - Game - Factory Default - Software Upgrade - SatcoDX Auto Programing - Smartcard and Serial Port 6.1. INFORMATION 6.2.
TOOLS 6.3. GAME When you enter “Game” menu, you will see three Games include Tetris, Snake and Othello (OSD 79). 6.3.1. TETRIS OSD 79 1. Mark “Setup” and press [ ] to select the level (speed). 2. Mark “Start” and press [OK] to start the game. 3. Mark “Cancel” and press [OK] to leave the game. 4.
TOOLS 6.5. SOFTWARE UPGRADE There are two ways of upgrading the software of the receiver as you can see at OSD 81. 6.5.1. RS232 UPGRADE OSD 81 English 1. This function allows you to upgrade the software of the receiver. This can be done from PC to receiver or from a master receiver to a slave receiver. 2. Connect master receiver or PC to the slave receiver via serial interface (0-Modem cable). Enter the “Software Upgrade” menu of the master receiver and press [ ] to change the upgrade mode.
TOOLS 6.6. SATCODX AUTO PROGRAMMING OSD 84 This function is using the tables of the SatcoDX websites to update your channel and satellite lists. 1. Start the SatcoDX application on your PC. 2. Select “SatcoDX Auto Programming” item from the “Tools” menu and press [OK]. The screen will show the message “OK to Proceed” (OSD 84). 3. Press [OK] again and you will see the message “Ready to Download” (OSD 85). 4. In the PC application set the Baud Rate to 115200 and start the download procedure.
TECHNICAL SPECIFICATION 7.
CONFORMITY DECLARATION “WE , UNIVERS BY FTE, DECLARE THAT THE PRODUCTS U4114 IS IN CONFORMITY WITH FOLLOWING DIRECTIVES LVD 73/23/EEC EMC 89/336/EEC AS LAST AMENDED BY 93/68/EEC” rev 1.1 English PAG.
