Datasheet

14 -I
Cylinders
Type of cylinders Ø 40-50-63 mm deriving from K and KD series supplied with long
internal cushionings to be used for opening and closing bulkheads or in those sectors
in which is needed, at the end of the stroke, a gradual and constant deceleration with
a higher control than that of a traditional cylinder. Dimensions (except those indicated)
and accessories don't change.
TYPE
1 = double-acting stainless steel rod
2 = double-acting chromium-plated steel rod
1 = 075 mm
2 = 100 mm
3 = 150 mm
4 = 200 mm
CUSHIONING VARIABLE
CUSHIONING
L = Long
SERIES
K= pneumatic cylinders ISO 6431 and VDMA 24562 standard
KD= pneumatic cylinders ISO 6431 and VDMA 24562 magnetic
version standard
Codification key
Standard stroke (mm)
Bore (mm)
Cushioning variable
Cushioning
Option
Type
Series
K 2 L 3 063 1000 M
040-050-063-080 mm
BORE
A minimum stroke three times the length of the cushioning
indicated in the table is recommended.
STROKE
M = magnetic version upon request for K series
OPTION
L8 + Stroke
40 182 232 332 432
50 178 228 328 428
63 185 235 335 435
80 190 240 340 440
Cushioning length
L8 + Stroke
75 100 150 200
Ø
Opposed cylinder - Type of cylinder characterized by the coupling of two and whose piston rods move in
opposite directions. The values of the thrust force are the same as those of the traditional
cylinders (see tables on page 11).
L + st roke 1 + strok e 2
K-C
TYPE
1C Double-acting opposed cylinder
male rod in stainless steel
2C Double-acting opposed cylinder
male rod in chromium-plated steel
Codification key
C2 Longer stroke (mm)
C1 Shorter stroke (mm)
Bore (mm)
Type
Option
Series
K 2C 032 0030 0050 M
*
Cyl.
L
Ø
32 194
40 220
50 222
63 252
80 266
100 288
125 334
160 378
200 382
OPTION
M = magnetic version upon request for K series
SERIES
K = pneumatic cylinder ISO 6431 and
VDMA 24562 standard
KD = pneumatic cylinder ISO 6431 and
VDMA 24562 magnetic version standard
Pneumatic cylinders -
with long cushioing