User manual

11
205 User Parameters
When two keys are shown, press them at the same time.
Keys Sample Display What the Display Means
50 Hz Models Only: 50 Hz Models Only.
Mains 2. voltage Bypass mains voltage is 3 x 385 VAC (if
385 385 385 the bypass mains option is installed).
Battery temp. Battery temperature is 25 C (77

F)
25 C
(This display is only for units with battery
temperature compensation. Battery tem-perature
compensation is standard for UT310-UT330 models
with internal batteries and is optional for all units
with external batteries.)
Output peak curr Output peak current is 3 x 19 AAC.
19 19 19 Aac
Normal operation Returns to “Normal operation”
load power xx% display and indicates the % load of
the most fully loaded phase (leg).
95.12.16 Year, month, day.
10.22.13 UTC Hour, minute, second. UTC = Universal
Time Coordination. (This may be
programmed to your time.)
User parameters allow you to define some of the information the UPS uses to operate. You can
view and program the parameters listed in Table 3 on the next page. The parameters are easy to
access and program; simply follow the five steps below.
Make sure that you fully understand
a parameter before attempting to change it
. If you need help, phone BEST’s Worldwide
Service or the nearest BEST office. (See the beginning of this manual for addresses and
telephone numbers.)
1. Press to display the user parameter list.
2. Press or to scroll through the list.
3. To switch a parameter “ON,” press .
4. To switch a parameter “OFF,” press .
5. To exit the parameter list, press .