Owner`s manual

Rear panel

1. Gain level control knob. This control knob allows adjustment of the input signal at the XLR input (2) or RCA

phono input (3). Turning the knob anti-clockwise lowers the volume; turning the knob clockwise increases the

volume.

2. Balanced XLR input: pin 1: ground, pin 2: hot (+), pin 3 cold (-)

3. Un-balanced RCA phono input

4. LED power indicator (on/off)

5. Power switch (on/off) – (see Important Safety Instructions, p.3 and 'Power' p.5).

6. Fuse holder – (see Important Safety Instructions, p.3, 'Power' and 'Fuse Replacement', p.5).

7. IEC mains input socket – (see Important Safety Instructions, p.3 and 'Power' p.5).

8. Rear panel guide – this panel provides important information about control and connectivity of THE ROCK.

9. Voltage setting label. An arrow on this label points towards the voltage setting of THE ROCK. The voltage is

factory set (see Important Safety Instructions, p.3 and 'Power' p.5)

THE ROCK User Manual 7 v0312