Troubleshooting guide

20
Step 8: Switching off uTV and uDirect
To switch off the devices:
• To end the transmission of the TV audio signal,
switch off the uTV by pressing the ON/OFF button
(a) as shown in fig. 7.
• If uDirect is not used for other purposes such as
phone calls, switch it off by pressing the ON/OFF
button for about two seconds as shown in fig. 8
until you see the battery indicator turn red.
If no audio input is available, the uTV
automatically stops the Bluetooth audio transmission
to uDirect after 3 minutes. Its status light (g) will turn
solid green.
(a)
fig. 8
fig. 7
ON/OFF
Battery
indicator