Troubleshooting guide

17
If the uTV status light (g)
• is green, make sure TV sound and uDirect are
switched on.
• blinks blue, you are in paused mode. Press the
uDirect main button (b) to resume streaming.
Step 6: Adjusting the volume of the TV signal
First, set the volume of the TV speakers at the level to
suit other viewers.
• If the uTV is connected to your TV with the
RCA/Cinch cable (i) or the SCART adaptor (j), adjust
the volume on the uTV by pressing the +/– volume
control (b) and (c). Depending on the model of your
hearing instruments you may also control the
volume directly from your hearing instruments.
• If your uTV is connected to the headphone socket
of your TV, you may also use your TV remote
(b)(c)
(c) (b)