Troubleshooting guide

13
Step 3: Pairing uDirect and uTV
Before starting to use the uTV, it must be paired with
your uDirect. The pairing procedure controls which
Bluetooth devices are permitted to communicate with
each other.
Make sure both devices are switched on as described
in step 2.
You do not need to insert uDirect into the uTV
charging slot (f) during pairing.
Pairing needs to be completed only once for
each device you wish to use with your uDirect.
• Initiate the pairing process on your uDirect by
pressing the Bluetooth pairing button for 2
seconds as shown in fig. 3 until the Bluetooth
indicator is fast flashing blue. Your uDirect will
remain in the pairing mode for two minutes or until
the pairing is completed.