Smart Control remote guide
Thank you Your Smart Control remote Thank you for choosing Unitron Smart Control remote for your Unitron hearing aids. Hearing healthcare professional: _______________ At Unitron, we care deeply about people with hearing loss. We work closely with hearing healthcare professionals to make advanced, purpose-driven solutions available to everyone. Because hearing matters.
Quick reference Table of contents Changing batteries 3 R 2 4 2 Your Smart Control at a glance ...............................................2 L R 6 1 7 8 L 5 1 Turning your Smart Control on and off....................................4 9 Replacing the battery ..............................................................5 10 11 Operating instructions.............................................................7 Adjusting your hearing aids with Smart Control.....................
Your Smart Control at a glance 3 1 On-off switch - turn your remote control on or off and also lock it to avoid sending unintentional commands 2 Left-both-right switch - allows you to select the hearing aid you want to adjust 3 Left (blue) indicator light - flashes to indicate your left hearing aid is being adjusted 2 4 6 1 7 8 5 9 10 4 Right (red) indicator light - flashes to indicate your right hearing aid is being adjusted 5 Scroll wheel* - allows you to manage the levels of speech and background n
Turning your Smart Control on and off Replacing the battery Your Smart Control has an On-Off (or travel lock) switch on the left side of the remote. The battery compartment is located on the back of the Smart Control. To turn the remote control on, slide the switch into the On or unlocked position . 1. Slide the battery cover in the direction of the arrow. To turn the remote control off, slide the switch into the Off or locked position .
Low battery warning Operating instructions When you see the left and right indicator lights blink alternating blue and red for two seconds, your Smart Control is warning you that the battery in your remote is low. You will see the warning every time you turn on your Smart Control or send a command to your hearing aids until you change the battery or the battery dies. Before using your Smart Control, turn on your hearing aids to ensure they are able to receive the Smart Control commands.
adjust your right hearing aid only. The right (red) indicator light will flash to indicate your right hearing aid is being adjusted. aids and provides an additional fine tuning adjustment beyond a traditional volume control. L Slide the switch to the center positionR to adjust both your hearing aids. Both indicator lights will flash to indicate your left and right hearing aids are being adjusted at once. Scroll the wheel up slowly to increase the clarity of sounds, such as speech.
may beep. Please refer to your hearing aid guide for more information on your hearing aids’ volume beeps. Note: Your hearing healthcare professional may configure the scroll wheel as your volume control and your +/– buttons as your comfortclarity control. Telephone (or program) button To switch to the telephone program, press the Telephone button.
LearnNow™ button (Available with Quantum 20, Moxi 20, Passport and Yuu hearing aids) The LearnNow™ button teaches your hearing aids the volume and comfortclarity settings you prefer in different listening environments. When you press the LearnNow button, Smart Control sends a command to your hearing aids to learn your current settings more quickly.
Accessories Caring for your Smart Control Your Smart Control can be used with a lanyard so that you can carry the remote around your neck or wrist. Attach the lanyard to the remote, as illustrated below. Open the battery compartment and remove the battery if the remote control will not be used for long periods of time. 1. 2. 3. 4. Do not use your Smart Control in the bath or shower or immerse it in water. If your remote control does become wet, do not attempt to dry it in an oven or microwave.
Cleaning your Smart Control Do not use alcohol to clean your remote control. Use a damp cloth to clean the outside of the remote. Troubleshooting guide Refer to the troubleshooting table below if you are having problems with your Smart Control. For problems with your hearing aids, please consult your hearing aid guide.
Warnings Smart Control should only be used as directed by your hearing healthcare professional. Smart Control uses a low-power, digitally coded inductive transmission to communicate to your hearing aids. Although unlikely, interference with medical devices such as pacemakers is possible. Interference should not occur with normal use, holding the remote comfortably in the hand, 4 inches (10 centimeters) or more from the body.
Your Smart Control and your hearing aids are given a unique communication code. Because of this code, your Smart Control will not affect hearing aids worn by others. Your Smart Control uses the most modern components to provide an extremely reliable experience with virtually no interference from other devices.
Declaration of conformity Hereby, Unitron Hearing declares that Smart Control is in compliance with the essential requirements and other relevant provisions of Directive 93/42/EEC. To obtain a copy of the Declaration of Conformity, please contact your local representative from the list of Unitron Hearing Distributors. This device complies with part 15 of the FCC rules and with RSS 210 of Industry Canada.
Guidance and manufacturer’s declaration – electromagnetic immunity Guidance and manufacturer’s declaration – electromagnetic immunity The Model Smart Control is intended for use in the electromagnetic environment specified below. The customer or the user of the Model Smart Control should assure that it is used in such an environment.
Recommended separation distances between portable and mobile RF communications equipment and the Model Smart Control The Model Smart Control is intended for use in an electromagnetic environment in which radiated RF Disturbances are controlled.
Distributor www.unitron.
