Operation Manual

hearing instrument compatible phones. You will hear a

short melody to indicate you are in the telephone (easy-

t) program. If your phone is hearing instrument

compatible, it will have a magnetic coil and easy-t will

activate automatically when the telephone is held to the

ear. Once the telephone is removed from the ear, the

hearing instrument will switch back to the normal

listening mode. Since the location and strength of the

magnetic coil varies among phone manufacturers, it may

be necessary to move the telephone receiver slightly to

find the best reception. If the hearing instrument does

not switch to telephone program automatically when the

telephone receiver is placed in proximity, the magnet for

easy-t hearing instruments should be attached to the

telephone receiver. The magnet is designed to

strengthen the magnetic field at the ear piece of hearing

instrument compatible telephones.

To affix the easy-t magnet:

1. Clean the telephone receiver.

2. Hold the magnet near the “listening end” of your

telephone receiver and release it (Figure 1). The

magnet will flip to the appropriate side and seek the

optimal position on the telephone receiver.

3. Place the double-sided tape in this optimal position

on the telephone receiver (Figure 2) and attach the

magnet to the tape (Figure 3).