Operation Manual

automatically when the telephone is held to the ear. Once
the telephone is removed from the ear, the hearing
instrument will switch back to the normal listening mode.
Since the location and strength of the magnetic coil varies
among phone manufacturers, it may be necessary to
move the telephone receiver slightly to find the best
reception. If the hearing instrument does not switch to the
telephone program automatically when the telephone
receiver is placed in proximity, the magnet for easy-t
hearing instruments should be attached to the telephone
receiver. The magnet is designed to strengthen the
magnetic field at the earpiece of hearing instrument
compatible telephones.
To affix the easy-t magnet:
1. Clean the telephone receiver.
2. Hold the magnet near the “listening end” of your
telephone receiver and release it (Figure 1). The
magnet will flip to the appropriate side and seek the
optimal position on the telephone receiver.
3. Place the double-sided tape in this optimal position
Figure 1 Figure 2 Figure 3
12