User's Guide

Push button
Your hearing aids may be equipped
with a push button which can be set
for switching between programs, to
adjust your volume, or to adjust comfort-clarity.
Program control
If the push button has been configured as a
program control, each time you push the
button, you will move to a new hearing aid
program.
Your hearing aids beep to indicate which
program you are in.
greater overall listening comfort in noisy
listening situations, rotate the rotary dial
control slowly backward away from your nose
or the scroll wheel slowly downward towards
the floor. Each step will change the hearing
aid performance. Sometimes multiple steps
are required to achieve the desired listening
results. After each step wait for about 4-5
seconds to allow the hearing aid to adjust to
the new setting.
As you change the comfort-clarity control
level, your hearing aids will beep.
Note: As the comfort-clarity control moves
toward the midpoint section, the effect on sound
is minimized.
14
Program 1
(e.g. automatic program) 1 beep
Program 2
(e.g. speech in noise) 2 beeps
Program 3
(e.g. easy-t/telephone) 3 beeps
Program 4 (e.g. music) 4 beeps
Easy-t/telephone (see pg 19) short melody
Easy-DAI short melody
DuoLink (if enabled) Opposite ear beeps the
(see pg 17) same as side being adjusted
Comfort-clarity control setting Beeps
Ideal comfort and clarity level 1 beep
Increase sound clarity level short beep
Increase listening comfort short beep
Maximum sound clarity level 2 beeps
Maximum listening comfort level 2 beeps
15