User Guide

Comfort-clarity control
If the lever has been configured as a comfort-
clarity control – press up to increase clarity of
speech; press down to decrease overall noise
or improve listening comfort. Each step will
change the hearing aid performance.
Sometimes multiple steps are required to
achieve the desired listening results. After
each press wait for about 4-5 seconds to allow
the hearing aid to adjust to the new setting.
As you change the comfort-clarity level, your
hearing aids will beep.
Note : As the comfort-clarity control moves
toward the midpoint section, the effect on
sound is minimized.
Operating instructions
Your BTE hearing aid comes with two controls
that allow you to further adjust your hearing
aid – a lever and a push button.
Lever
The lever on your hearing aid can be
set up as either a volume control or
a comfort-clarity control.
Volume control
If the lever has been configured as a volume
control, you can adjust the loudness of your
hearing aids. Press up to increase; press
down to decrease. As you change the volume
level, your hearing aids will beep.
14
Comfort-clarity control setting Beeps
Ideal comfort and clarity level 1 beep
Increase sound clarity level short beep
Increase listening comfort short beep
Maximum sound clarity level 2 beeps
Maximum listening comfort level 2 beeps
15
Volume setting Beeps
Recommended volume level 1 beep
Turning volume up short beep
Turning volume down short beep
Maximum volume level 2 beeps
Minimum volume level 2 beeps