User Manual

1110
(c) (b)
Step 5: Adjusting the volume of the TV signal
First, set the volume of the TV speakers at the level
to suit other viewers.
● If the uTV 2 is connected to your TV with the
RCA/Cinch cable (i) or the SCART adaptor (k),
adjust the volume via the uTV 2 volume control
(b) and (c) until the sound is comfortable.
● If your uTV 2 is connected to the headphone socket
of your TV, you may also use your TV remote control
to adjust volume via the TV directly. Refer to the TV
user guide for more details on setting the TV volume.
If your TV is connected to a satellite receiver or a
set-top box, make sure the volumes of these
additional devices are set to a medium level for
best audio quality results.
If the headset moves out of range of the uTV 2,
the wireless audio transmission will be terminated.
If the headset is then moved back into range of
the uTV 2, it will automatically resume streaming
to your headset.
It may take up to 10 seconds until the streaming
resumes. Both streaming light indicators (g)
should be solid blue during streaming.
If the uTV 2 status light (g):
● is green, make sure TV sound and headset
are switched on.
● blinks blue, you are in paused mode. Press
the headset main button ( ) to resume
streaming.