User Manual

98
fig. 2
(a)
(g)
Step 2: Switching on
1. Switch on the uTV by a short press of the ON/OFF
button (a) as shown in fig. 2. The status light (g)
will illuminate green iniatially and may switch to
blue later.
Step 3: Pairing Headset and uTV
Before starting to use the uTV, it must be paired with
your headset. The pairing procedure controls which
Bluetooth devices are permitted to communicate with
each other.
Pairing needs to be completed only once for
each device you wish to use with your headset.
● Initiate the pairing process on your headset as
stated in its manual.
● If the uTV basestation status light (g) is not
flashing blue already, press the ON/OFF button (a)
for 5 seconds until the Bluetooth indicator (g) is
fast flashing blue.
● Wait until the Bluetooth indicator light (g) turns
solid blue. This can take up to 2 minutes but
typically is done within a few seconds.
Step 4: Listening to your TV
You will hear the sound of your TV directly in your
headset.
If you cannot hear the sound of your TV through
uTV please repeat steps 1 to 4.
The uTV system supports Bluetooth operation up to a
range of 30 m (100 ft). Line-of-sight between your
headset and the uTV is not required. However,
interference in the environment by walls or furniture
may reduce the operating range.