User's Manual

Smart Alert

™

remote – hearing functions

Alerting detectors and devices

PROBLEM POSSIBLE SOLUTIONS

Indicator lights on Smart Alert remote not flashing

• Not turned on • Move travel lock to ‘unlock’ position

• Low/dead battery • Recharge battery in charging station

• Poor battery contact • Consult your hearing healthcare professional

• Battery upside down • Insert battery minus (–) side down

Indicator lights flashing rapidly

• Low battery • Recharge battery

Hearing instruments not responding to Smart Alert remote commands

• Holding the remote device too far away • Move remote device closer to you

Doorbell detector

PROBLEM POSSIBLE SOLUTIONS

Nothing happens when doorbell detector is activated with

test button

• Doorbell detector waits until it has been quiet for 2 seconds • Try again

in order to avoid acoustic feedback

• Low battery • Replace battery. Only use 9V alkaline 6LR61 or a lithium 6F22 type battery

TROUBLESHOOTING GUIDE