User's Guide Part 1

54
pairing may vary for each device. Please refer to
the device’s user guide or dealer support if you
cannot complete the pairing procedure with the
generic steps described below.
1. Turn ON both your uDirect 2 and the other
device.
2. Place them next to each other.
3. Set your device into Bluetooth pairing mode.
4. Initiate the pairing process on your uDirect 2
by simultaneously pressing the (
) and ( )
buttons for 2 seconds until the audio
indicator is rapidly blinking blue.
5. Your uDirect 2 will remain in the pairing
mode for two minutes or until the pairing is
completed.
6. If a passcode is required, enter “0000” (four
zeros).
After pairing, wait until the devices have
completed connection.
Confirmation of successful connection is