User's Guide Part 1

51
the audio indicator starts to rapidly blink
blue.
6. Your uDirect 2 will remain in the pairing mode
for two minutes or until pairing is completed.
7. Your phone should present a list of Bluetooth
devices discovered. Select “Unitron uDirect 2”
from this list.
8. Your phone may then ask you to enter a
passcode. If so, enter “0000” (four zeros).
Some phones may ask which Bluetooth
service you want to enable. Select “Headset”
or, if available, “Stereo Headset”.
9. Your uDirect 2 should now be paired to your
phone and the audio indicator will stop
blinking.
The pairing process is independent of the
neckloop (it does not need to be plugged in).
2 sec