Technical data

Before opening the machine in case of malfunction or emergency, switch off by
means of the emergency STOP, respectively the ON/OFF switch and disconnect it
from electric power source.
Electric power can cause severe injuries. All symptoms of faulty electric components
to be taken seriously and possible causes for accidents to be eliminated immediately.
All repair work only to be carried out by qualified service personnel.
Make sure that the machine cannot move. If the machine is equipped with a brake, it
must be set during working.
When using pipe cleaning hoses observe marking (approx. 50 cm). Strictly follow
instructions in para “Pipe Cleaning”, chapter “Operation”.
During loading hoisting device to be fastened properly at jack rings. Ensure balanced
load distribution.
After work the machine to be locked and secured against unauthorized/accidental
operation by means of the safety lever.
Use of equipment and/or consumables which is not delivered or expressively
approved by Unitor results in expiration of the EC Declaration of
Conformity, as well as product liability and warranty.