Specifications

8
Presentation
TD420VE, TAD420VE, TD520GE, TAD530/531GE and TAD520VE are in-line, direct injected, 4-cylinder industrial
diesel engines.
TAD620VE, TD720GE, TAD730/731GE, TAD720VE, TAD732GE, TAD721VE, TAD733GE and TAD722VE are in-
line, direct injected, 6-cylinder industrial diesel engines.
All engines are equipped with electronically controlled fuel management (EDC4), turbocharger, thermostatically
controlled cooling systems and electronic speed control. All TAD engines are also equipped with an intercooler.
Technical description
Engine and engine block
The engine block and cylinder head are manufac-
tured of alloyed cast iron
Five bearing, induction hardened crankshaft
(TD420VE, TAD420VE, TD520GE, TAD530/
531GE, TAD520VE, TAD532GE)
Seven bearing, induction hardened crankshaft
(TAD620VE, TD720GE, TAD730/731GE,
TAD720VE, TAD732GE, TAD721VE, TAD733GE,
TAD722VE)
Replaceable wet cylinder liners (TD520GE,
TAD530/531GE, TAD520VE, TD720GE, TAD730/
731GE, TAD720VE, TAD732GE, TAD721VE,
TAD733GE, TAD722VE, TAD532GE)
Replaceable dry cylinder liners (TAD620VE)
Liner-less (TD420VE, TAD420VE)
Cast aluminum pistons with oil cooling
Three piston rings, with a “keystone” type top ring
Induction hardened overhead camshaft with valve
lifters and push rods.
Two valves per cylinder
Replaceable valve seats and valve guides (does
not apply to TD420VE, TAD420VE, TAD620VE)
Control unit
Microprocessor based fuel supply control unit
(EDC 4)
Maximum ambient temperature 80° C
Automatic sensing of 24 V or 12 V.
Atmospheric pressure sensor for high altitude ap-
plications (option)
Fuel system
Belt driven feed pump - BOSCH injection pump,
one for each cylinder
HEINZMANN actuator
EDC 4 (Electronic Diesel Control). Please refer to
a separate description.
Lubrication system
Water cooled oil cooler.
Crankshaft driven lube oil pump
Full flow filter with bypass
Turbocharging system
Turbocharger
Cooling system
Radiator with expansion tank
Air cooled intercooler (TAD)
Electrical system
24 V (standard), 12 V (option)
80/209