Specifications

6.3.4.2. Activation of an alarm or fault
The appearance of an alarm o
r
a fault causes the corresponding screen to be displayed (examples below)
FAULT
ALARM
Low coolant Level
06/10/06 10:30
OK=HELP
FAULT
FAULT
Emergency Stop
06/10/06 15:30
Esc=RESET OK=HELP
Press OK (on the scrolling and selection wheel) to access the help message if it is available (example below)
HELP
Check the level
fuel
Esc=EXIT
If the alarm is no longer active, it is reset automatically (cause disappears).
Press Esc to reset a fault:
- reset acknowledged if the cause of the fault has been removed
- reset not performed if the cause of the fault is still present.
58/209