Specifications

6.3.4 Alarms and faults
6.3.4.1. Viewing alarms and faults
Alarms and faults are displayed as follows:
 Alarms
All alarms will cause:
 the yellow LED to flash "General alarm".
In conjunction with this LED:
 a flashing pictogram appears on the LCD screen
representing the circuit affected by the alarm and the
associated indicator, if present
(example)
 message on
graphic display
(example)
FAULT
ALARM
Low Fuel Level
25/12/05 15:30
OK=HELP
 Faults
All faults will cause:
 the generating set to stop: immediate or gradual stop (coolant temperature and overload or short circuit)
 the red LED to flash "General fault".
In conjunction with this LED:
 a flashing pictogram
appears on the LCD screen
representing the circuit affected by the fault and the
associated indicator
, if present
(example)
 message on graphic display
(example)
FAULT
FAULT
Oil Pressure
25/12/05 15:30
OK=HELP
Faults have priority over alarms. Faults are displayed in the descending order of their appearance (from the most recent to the
oldest).
57/209