Specifications

Checking the fuel pre-filter
The fuel is highly flammable and its vapours are combustible.
The fuel pre-filter must only be bled when the engine is stopped and cold.
Dange
r
 Check that there is no water or sediment at the bottom of the pre-filter.
 If necessary, drain the pre-filter using the following procedure:
 Undo the drain plug (A) at the bottom of the pre-filter by two or three turns.
 Collect the water and/or sediment in a suitable container.
 When fuel starts to flow out, tighten the drain plug.
 Check that there are no leaks.
 If necessary, reprime the fuel circuit.
External check and cleaning of the radiator
Do not use a high pressure cleaner to clean the radiator.
Take care not to damage the radiator fins.
Important
 Remove the guards to access the radiator.
 Clean with water and a gentle detergent. Clean using a soft brush.
 Refit the guards.
A
35/209